基于多通道通信技术的高速数据采集器的研制

主要介绍应用多通道通信技术开发研制的高速数据采集器的功能特点 ,对实际研制和使用中的几个关键技术进行了较详细的分析讨论 .应用于流场测试试验的结果表明 ,该系统速度快、稳定性好、功能齐全且自动化程度高 .该系统具有的高精度非常适合于流场测试 ,能确保测试的准确性     

一种基于程序域边界分析的测试方法

边界附近的点对程序故障更加敏感.针对这一特征,提出了一种基于程序域边界分析的测试方法.从被测程序本身出发,进行定义域确定及子域划分,分析定义域边界和子域边界,并跟据其边界测试点产生测试用例,以检测域边界附近的处理.实验表明对定义域边界及其子域边界进行测试,可有效地提高故障覆盖率.     

Testing of software with an operational profile

One of the important features of any software system is its operational profile. This is simply the set of all operations that a software is designed to perform and the occurence probabilities of these operations. We present a new model on optimal software testing such that testing is done sequentially using a set of test cases. There may be failures due to the operations in each of these cases. The model parameters, consisting of testing costs and failure rates, all depend on the cases used and the operations performed. Our aim is to find the optimal testing durations in all of the cases in order to minimize the total expected cost. This problem leads to interesting decision models involving nonlinear programming formulations that possess explicit analytical solutions under reasonable assumptions. © 2000 John Wiley & Sons, Inc., Naval Research Logistics 47: 620–634, 2000     

Testing or fault-finding for reliability growth: A missile destructive-test example

A new piece of equipment has been purchased in a lot of size m. Some of the items can be used in destructive testing before the item is put into use. Testing uncovers faults which can be removed from the remaining pieces of equipment in the lot. If t < m pieces of equipment are tested, then those that remain, m₁ = m − t, have reduced fault incidence and are more reliable than initially, but m₁ may be too small to be useful, or than is desirable. In this paper models are studied to address this question: given the lot size m, how to optimize by choice of t the effectiveness of the pieces of equipment remaining after the test. The models used are simplistic and illustrative; they can be straightforwardly improved. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 623–637, 1997     

利用验前信息的一种序贯检验方法——序贯验后加权检验方法

序贯验后加权检验方法是Bayes 统计观点在假设检验中的运用。本文提出了该方法的一般理论,给出了当总体的分布参数具有验前信息时的序贯检验方法。文中确定了决策区的划分,同时讨论了序贯截尾方案,给出了检验中可能犯两类错误的概率的上界,并将一般理论应用于产品的可靠性检验和再入飞行器随机落点的精度鉴定。由于运用了验前信息,因此能有效地在少量试验之下进行统计假设检验。本文所提供的方法对于昂贵产品试验结果的统计评定具有普遍意义。     

虚拟仪器的无人机舵机测试系统设计与实现

结合无人机舵机的测试需求,设计了一种基于虚拟仪器设计的无人机舵机测试系统,讨论了测试系统的软硬件设计及系统实现,分析了系统的优点,并阐述了系统设计过程中关注的几个问题。     

基于Lab Windows/CVI的弹发射信号检测方案

在分析NI-6259模块采样机理基础上,提出了一种基于Lab Windows/CVI检测28路弹发射信号的方案,并采用了矩阵转换法对采样数据进行处理,从而使发射信号波形更能直观地显示。实际应用表明,该方案能够实时检测火控单体输出的弹发射信号,对提高火控系统的检测效率有十分重要的意义。     

疲劳裂纹闭合的非线性超声在线测量

建立了外部载荷作用下用非线性振动-声场调制指数表征裂纹尺寸的数学模型。根据对外载荷与塑性致闭应力共同作用下裂纹面的开闭响应的分析,提出了裂纹张开和闭合应力的在线测量方法。在一块含中心穿透裂纹的铝合金薄板试件上进行了裂纹闭合参数的测量实验,实验结果表明,使用振动-声场调制技术在线测量裂纹闭合参数是可行且有效的,且该方法还能用于分析小裂纹的特殊开闭行为。     

模糊综合评判在战斗损伤评估中的应用

应用模糊综合评判对某型火炮的试验数据进行了初步分析,通过聚类分析得出了该型火炮的易损部件(战斗损伤),以及参加试验的6门火炮的损伤等级。计算结果表明,在战损评估中应用模糊数学的方法是可行的。     

残差GM（1，1）模型在恒加试验中的应用

介绍了目前恒加试验中,正常应力水平下特征寿命点估计的数据统计分析方法及其不足。针对恒加试验的特点和所需解决的问题,基于灰色预测理论的残差GM(1,1)模型,给出了一种新的求解方法。最后分别运用三种不同的方法对给出的应用实例进行正常应力水平下特征寿命值的求解,证明了本文所给出的方法确实可行。